D-Link DFL-870

3.91. Pipe
Description
A pipe defines basic traffic shaping parameters. The pipe rules then determines which traffic
goes through which pipes.
Properties
Name Specifies a symbolic name for the pipe. (Identifier)
LimitKbpsTotal Total bandwidth limit for this pipe in kilobits per
second. (Optional)
LimitPPSTotal Total packet per second limit for this pipe.
(Optional)
LimitKbps0 Specifies the bandwidth limit in kbps for
precedence 0 (the lowest precedence). (Optional)
LimitPPS0 Specifies the packet per second limit for
precedence 0 (the lowest precedence). (Optional)
LimitKbps1 Specifies the bandwidth limit in kbps for
precedence 1. (Optional)
LimitPPS1 Specifies the packet per second limit for
precedence 1. (Optional)
LimitKbps2 Specifies the bandwidth limit in kbps for
precedence 2. (Optional)
LimitPPS2 Specifies the packet per second limit for
precedence 2. (Optional)
LimitKbps3 Specifies the bandwidth limit in kbps for
precedence 3. (Optional)
LimitPPS3 Specifies the packet per second limit for
precedence 3. (Optional)
LimitKbps4 Specifies the bandwidth limit in kbps for
precedence 4. (Optional)
LimitPPS4 Specifies the packet per second limit for
precedence 4. (Optional)
LimitKbps5 Specifies the bandwidth limit in kbps for
precedence 5. (Optional)
LimitPPS5 Specifies the packet per second limit for
precedence 5. (Optional)
LimitKbps6 Specifies the bandwidth limit in kbps for
precedence 6. (Optional)
LimitPPS6 Specifies the packet per second limit for
precedence 6. (Optional)
LimitKbps7 Specifies the bandwidth limit in kbps for
Chapter 3: Configuration Reference
259