D-Link DFL-870

precedence 7 (the highest precedence). (Optional)
LimitPPS7 Specifies the packet per second limit for
precedence 7 (the highest precedence). (Optional)
UserLimitKbpsTotal Total bandwidth limit per group in the pipe in
kilobits per second. (Optional)
UserLimitPPSTotal Total throughput limit per group in the pipe in
packets per second. (Optional)
UserLimitKbps0 Specifies the bandwidth limit per group in kbps for
precedence 0 (the lowest precedence). (Optional)
UserLimitPPS0 Specifies the throughput limit per group in PPS for
precedence 0 (the lowest precedence). (Optional)
UserLimitKbps1 Specifies the bandwidth limit per group in kbps for
precedence 1. (Optional)
UserLimitPPS1 Specifies the throughput limit per group in PPS for
precedence 1. (Optional)
UserLimitKbps2 Specifies the bandwidth limit per group in kbps for
precedence 2. (Optional)
UserLimitPPS2 Specifies the throughput limit per group in PPS for
precedence 2. (Optional)
UserLimitKbps3 Specifies the bandwidth limit per group in kbps for
precedence 3. (Optional)
UserLimitPPS3 Specifies the throughput limit per group in PPS for
precedence 3. (Optional)
UserLimitKbps4 Specifies the bandwidth limit per group in kbps for
precedence 4. (Optional)
UserLimitPPS4 Specifies the throughput limit per group in PPS for
precedence 4. (Optional)
UserLimitKbps5 Specifies the bandwidth limit per group in kbps for
precedence 5. (Optional)
UserLimitPPS5 Specifies the throughput limit per group in PPS for
precedence 5. (Optional)
UserLimitKbps6 Specifies the bandwidth limit per group in kbps for
precedence 6. (Optional)
UserLimitPPS6 Specifies the throughput limit per group in PPS for
precedence 6. (Optional)
UserLimitKbps7 Specifies the bandwidth limit per group in kbps for
precedence 7 (the highest precedence). (Optional)
UserLimitPPS7 Specifies the throughput limit per group in PPS for
precedence 7 (the highest precedence). (Optional)
Grouping Grouping enables per-port/IP/network static
bandwidth limits as well as dynamic balancing
between groups. (Default: None)
Chapter 3: Configuration Reference
260