3.92. PipeRule
Description
A Pipe Rule determines traffic shaping policy - which Pipes to use - for one or more types of
traffic with the same granularity as the standard ruleset.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the object.
(Optional)
SourceInterface Specifies the name of the receiving interface to be
compared to the received packet.
SourceNetwork Specifies the sender span of IP addresses to be
compared to the received packet.
DestinationInterface Specifies the destination interface to be compared
to the received packet.
DestinationNetwork Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Service Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
Schedule By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
ForwardChain Specifies one or more pipes to be used for forward
traffic. (Optional)
ReturnChain Specifies one or more pipes to be used for return
traffic. (Optional)
Precedence Specifies what precedence should be assigned to
the packets before sent into a pipe. (Default:
FromPipe)
FixedPrecedence Specifies the fixed precedence.
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
262
To Next Page
Loading...
