D-Link DFL-870

- 0x00001000 RESPONSE
- 0x00002000 TOPO_CHANGES
- 0x00004000 MEDIA
- 0x00008000 CONTACT
- 0x00010000 CONN
- 0x00020000 PING
- 0x00040000 TRANSACTION
- 0x00080000 CALLLEG
- 0x00100000 REGISTRY
Flags can be added in the usual way. The default value is 0x00000003 (GENERAL and ERRORS).
NOTE: 'verbose' option outputs a lot of information on the console which may lead to system
instability. Use with caution.
Usage
sipalg -definition [<alg>]
Show running ALG configuration parameters.
sipalg -registration[={SHOW | FLUSH}] <alg>
Show or flush current registration table.
sipalg -calls <alg>
Show active calls table.
sipalg -session <alg>
Show active SIP sessions.
sipalg -connection <alg>
Show SIP connections.
sipalg -statistics[={SHOW | FLUSH}] <alg>
Show or flush SIP counters.
sipalg -snoop={ON | OFF | VERBOSE} [<ipaddr>] [-flags=<String>]
Control SIP snooping. Useful for troubleshooting SIP transactions. NOTE: 'verbose' option
outputs a lot of information on the console which may lead to system instability. Use with
caution.
Options
-calls Show active calls table.
Chapter 2: Command Reference
85