FileListType Specifies if the file list contains files to allow or
deny. (Default: Block)
FailModeBehavior Standard behaviour on error: Allow or Deny.
(Default: Deny)
File List of file types to allow or deny. (Optional)
VerifyContentMimetype Verify that file extentions correspond to the MIME
type. (Default: No)
Antivirus Disabled, Audit or Protect. (Default: Disabled)
ScanExclude List of files to exclude from antivirus scanning.
(Optional)
CompressionRatio A compression ratio higher than this value will
trigger the action in Compression Ratio Action, a
value of zero will disable all compression checks.
(Default: 20)
CompressionRatioAction The action to take when high compression
threshold is violated, all actions are logged.
(Default: Drop)
AllowEncryptedZip Allow encrypted zip files, even though the
contents can not be scanned. (Default: No)
MaxArchiveDepth The maximum number of archive "layers" that the
antivirus engine will extract. (Default: 5)
ZDEnabled Enable ZoneDefense Block. (Default: No)
ZDNetwork Hosts within this network will be blocked at
switches if a virus is found.
DNSBL Disable or Enable DNSBL. (Default: No)
SpamThreshold Spam Threshold defines when an email should be
considered as Spam. (Default: 10)
DropThreshold Drop Threshold defines when an email should be
considered malicious and be dropped. (Default: 20)
SpamTag Spam Tag that is inserted into the subject for an
email considered as Spam or malicious. (Default:
"*** SPAM *** ")
ForwardBlockedMail Forward blocked mails to DropAddress. (Default:
No)
DropAddress Email address that emails reaching the drop
threshold will be rerouted to.
AppendTXT Use TXT records (will only be used if reaching the
drop threshold). (Default: No)
CacheSize Size of the IP Cache of checked sender IP
addresses. (Default: 0)
CacheTimeout Timeout in seconds before a cached IP address is
removed. (Default: 600)
Chapter 3: Configuration Reference
123
To Next Page
Loading...
