Description
An IDP Rule Action specifies what signatures to search for in the network traffic, and what action
to take if those signatures are found.
Properties
Action Specifies what action to take if the given signature
is found. (Default: Audit)
Signatures Specifies what signature(s) to search for in the
network traffic. (Optional)
ZoneDefense Activate ZoneDefense. (Default: No)
BlackList Activate BlackList. (Default: No)
BlackListTimeToBlock The number of seconds that the dynamic black list
should remain. (Optional)
BlackListBlockOnlyService Only block the service that triggered the
blacklisting. (Default: No)
BlackListIgnoreEstablished Do not drop existing connection. (Default: No)
PipeLimit Specifies the bandwidth limit in kbps for hosts
triggered by this action.
PipeNetwork Traffic shaping will only apply to hosts that are
within this network. (Default: 0/0)
PipeNewConnections Enable piping of new connections from and to the
same host. (Default: No)
PipeTimeWindow Throttling of new connections to and from the
triggering host will stop after the configured
amount of time. (Default: 10)
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
192
To Next Page
Loading...
