PrivateIP The private IP address of this high availability node.
(Optional)
PrivateIP6 The private IP6 address of this high availability
node. (Default: localhost6)
NOCHB This will disable sending Cluster Heartbeats from
this interface (used by HA to detect if a node is
online and working). (Optional)
MTU Specifies the size (in bytes) of the largest packet
that can be passed onward. Must be 1294 or larger
when IPv6 is enabled. (Default: 1500)
Metric Specifies the metric for the auto-created route.
(Default: 100)
DHCPEnabled Enable DHCP client on this interface. (Default: No)
DHCPHostName Optional DHCP Host Name. Leave blank to use
default name. (Optional)
AutoSwitchRoute Allows traffic to be forwarded transparently across
all interfaces with Transparent Mode enabled that
belong to the same routing table. (Default: No)
DHCPPassthrough Allow DHCP to pass through transparently.
(Default: No)
NonIPPassthrough Allow non-IP protocols to pass through
transparently. (Default: No)
BroadcastFwd By default, this traffic is dropped. (Default: No)
AutoInterfaceNetworkRoute Automatically add a route for this interface using
the given network. (Default: Yes)
AutoDefaultGatewayRoute Automatically add a default route for this interface
using the given default gateway. (Default: Yes)
DHCPDNS1 IP of the primary DNS server. (Optional)
DHCPDNS2 IP of the secondary DNS server. (Optional)
DHCPv6DNS1 IP of the primary IPv6 DNS server. (Optional)
DHCPv6DNS2 IP of the secondary IPv6 DNS server. (Optional)
EnableRouterAdvertisement Enable Router Advertisement for this interface.
(Default: No)
SNMPIndex Interface index assigned by the system when
persistent interface indexes are enabled. (Default:
0)
MemberOfRoutingTable All or Specific. (Default: All)
RoutingTable Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
Chapter 3: Configuration Reference
239
To Next Page
Loading...
