D-Link DFL-870

Show runtime OSPF information.
Description
Show runtime information about the OSPF router process(es).
Note: -process is only required if there are >1 OSPF router processes.
Usage
ospf
Show runtime information.
ospf -iface [<interface>] [-process=<OSPF Router Process>]
Show interface information.
ospf -area [<OSPF Area>] [-process=<OSPF Router Process>]
Show area information.
ospf -neighbor [<OSPF Neighbor>] [-process=<OSPF Router Process>]
Show neighbor information.
ospf -route [{HA | ALT}] [-process=<OSPF Router Process>]
Show the internal OSPF process routingtable.
ospf -database [-verbose] [-process=<OSPF Router Process>]
Show the LSA database.
ospf -lsa <lsaID> [-process=<OSPF Router Process>]
Show details for a specified LSA.
ospf -snoop={ON | OFF} [-process=<OSPF Router Process>]
Show troubleshooting messages on the console.
ospf -ifacedown <interface> [-process=<OSPF Router Process>]
Take specified interface offline.
ospf -ifaceup <interface> [-process=<OSPF Router Process>]
Take specified interface online.
ospf -execute={STOP | START | RESTART}
[-process=<OSPF Router Process>]
Start/stop/restart OSPF process.
Options
-area Show area information.
Chapter 2: Command Reference
70