User Interface
110
DX8210 Barcode Scanner
Host IP DNS2
Enter the address of the Secondary Domain Name System (DNS) in the field
provided.
Setup Network (CFG)
Setup IP Address
Enter the IP address for ETH2 (CFG) in the field provided. Consult your network
administrator to obtain a new address.
Setup Netmask
Enter the subnet mask address for ETH2 (Setup) in the field provided. Consult your
network administrator to obtain a new address.
Disable Config Net on Inactive SC5000
Click the check-box to disable the config port on the inactive SC5000.
3. When you have finished making changes, click Update All to save all pend-
ing changes, click Reset Al
l to revert to all previously saved values, and click
Reset Page to revert to previous saved values on the current page.
To Next Page
Loading...
Need help?
General
