What You Need to Know About Your Application
Reference Manual 15
10. Complete electrical installation
(See Chapter
)
11. Align the DS8110 for proper operation
12. Configure the DS8110
(See Chapter
)
13. Check DS8110 operations
(See Chapter
)
What You Need to Know About Your Application
To assure you get optimal performance out of your DS8110, it must be installed
to meet the complete needs of your application. Therefore, take the time to learn
the details of your application. The better you know your application, the easier
it is to apply the DS8110’s capabilities to meet your application’s requirements.
Below is what you will need to know before you can begin installation:
• Conveyor Specifications
- Conveyor type: Belt, tilt-tray, cross belt, other?
-
What is the conveyor width?
- What is the conveyor speed?
- Does conveyor speed vary or is it constant?
• Product Specifications
- Are the packages being transported always singulated (not touching) or
no
n-singulated (possibly touching)?
- How many different product sizes may be involved?
- Are products justified: toward/away from reader, centered, or variable?
• Application Specifications
- How will the barcode information be used in your application?
-
What are your communication requirements?
While it is nearly impossible to cover all application configurations, the next sev-
eral pages provide the basics
on determining how to mechanically install your
DS8110. If you need additional assistance, feel free to contact your sales repre-
sentative or customer service (www.datalogic.com).
To Next Page
Loading...
Need help?
General
