Installation
Reference Manual 17
General Mounting Guidelines
It is important that you follow these general precautions when installing, setting
up, operating, maintaining, troubleshooting, or replacing any Datalogic prod-
ucts, parts or related equipment.
As you plan and install your DS8110 barcode scanning system application, be
sure
to keep the following guidelines in mind:
• All mounting structure assembly and equipment installation can be per-
formed by one installer.
• Determine the proper orientation and position of the barcode scanner.
• Leave adequate clearances (approxima
tely 300 mm [12 inches]) for wiring.
• Route wires carefully to reduce or minimize electrical noise. When power
an
d communication wiring must cross, make their intersection perpendicu-
lar.
• Proper grounding limits the effects of noise due to Electromagnetic Inter-
ference (EMI).
Mounting Structure Considerations
Your first task is to mount your DS8110 barcode scanner. You can provide your
own mounting structure or Datalogic can design one for you. We recommend
using a Datalogic mounting structure for standard applications.
Your mounting structure must provide the following capabilities:
• It is adjustable enough for you to move your unit to the optimum position
for proper scanning.
• It allows a technician access to the ba
rcode scanner while it is mounted.
• It must be as vibration free as possibl
e so as not to affect the scanning
accuracy.
• It is constructed of steel or aluminum.
• It provides approximately 300 mm [12 inches] minimum clearance on all
side
s. This clearance is necessary to provide proper ventilation, allow
access to all panels of the barcode scanner, and allow room for proper ser-
vicing.
To Next Page
Loading...
Need help?
General
