Datalogic DS8100 User Manual

User Interface
52 DS8110 Barcode Scanner
Modify Settings
Use the Modify Settings Menu selections during initial setup to configure
your scanning system. If necessary, you can later make modifications to the con-
figuration using the same menu selections.
“System Information” on page 49
Global Settings
•
“Operating Mode” on page 54
• “Barcode Settings Table” on page 68
• “Barcode Configuration” on page 75
• “Serial Ports” on page 102
- “Serial Ports | Main Port” on page 97
- “Aux Serial Port” on page 106
• “Ethernet” on page 108
- “Ethernet | Line Settings” on page 109
- “Ethernet | User Sockets” on page 111
- “Ethernet | Ethernet_IP” on page 115
- “Ethernet | WebSentinel” on page 119
• “Fieldbus” on page 121
• “Messaging” on page 126
- “Messaging | Message Format” on page 127
- “Messaging | Message Builder” on page 139
- “Messaging | Statistics” on page 145
- “Messaging | Protocol Index” on page 147
- “Messaging | Pass-Thru” on page 151
- “Messaging | Diagnostics Messages” on page 153
• “Digital I/O” on page 156
• “Diagnostics” on page 159
• “Energy Saving” on page 163
• “HMI Settings” on page 167

Datalogic DS8100 Specifications

General

Brand	Datalogic
Model	DS8100
Category	Barcode Reader
Language	English