Reference Manual ix
Compliance
Electrical Safety
This product conforms to the applicable requirements contained in the European
Standard for electrical safety EN 60950 at the date of manufacture.
Laser Safety
The following information is provided to comply with the rules imposed by inter-
national authorities and refers to the correct use of the DS8110 barcode scan-
ners.
Standard Regulations
These barcode scanners use low-power laser diodes. Avoid staring at the beam
as one would with any very strong light source, such as the sun.
Take care when installing the laser device to avoid inadvertent laser beam con-
tact with the eye of an observer, including through reflective surfaces.
This product conforms to th
e
applicable requirements of IEC 60825-1 and com-
plies with 21 CFR 1040.10 except for deviations pursua
nt to Laser Notice N° 50,
date June 24, 2007. The scanner is classified as a Class 2 laser product accord-
ing to IEC 60825-1 regulations.
There is a safety device which allows the laser to be switched on only if the
mo
to
r is rotating above the threshold for its correct scanning speed.
Bureau of Indian Standard (BIS)
Self Declaration – Conforming to IS 13252 (Part 1):2010, R-41009288.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in exposure to hazardous visible laser light
To Next Page
Loading...
Need help?
General
