Barcode Scanning Features
196
DS8110 Barcode Scanner
18. Run the PackTrack calibration procedure
(see section
).
19. When the scanner(s) has been configured and calibrated, backup the system
conf
iguration using Utilities | Backup or Restore. It is recommended to save
the system parameters to the backup module on the CBX510 and to a file
on your computer.
20. Select Backup from the Action drop-down list, and select Flash Memory
from the To drop-down list.
21. Click OK. The following message will be displayed.
22. Next, select Backup from the Action drop-down list, and select File from the
To drop-down list.
23. Click OK to
download the configuration text file (param.txt) to your com-
puter.
To Next Page
Loading...
Need help?
General
