V1108, 8.5
Tensile strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..S
Tensile strength of the selected material.
E module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..E
E- module of the selected material.
The materials are initially listed according to their material number, which is shown in the first
column (ID).
The list can be sorted according to the different properties. If you have a mouse available,
click on the title of a column. The materials will be sorted in ascending or descending order of
that property.
To change an existing material, go to the relevant line and change the values as you see fit.
Use the ENTER key to confirm a typed value.
To delete an existing material, move the cursor to the relevant line and press the function key
‘delete material’ (S6) to erase the values.
To program a new material, move the cursor to an empty space and start programming its
values.
Function keys
delete
material
To delete the material that is currently shown on the
screen.
scroll
up
To flip upwards through the material pages.
scroll
down
To flip downwards through the material pages.
To Next Page
Loading...
