Delem DA-65W - Back Gauge Dimensions

V1108, 8.17
Machine lower side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..M2
Select the relevant machine table.
Press the key to select the required setting. To search for the correct machine parts,
press the function key ‘show library’.
Frame height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..FH
Total height of machine frame.
Frame width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..FW
The width (or depth) of the machine frame.
Frame thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..FT
The thickness of the side frame.
Throat height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..TH
The height of the workspace (the ‘throat’) in the machine.
Throat width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..TW
The width (or depth) of the workspace.
Throat position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..TP
The position of the workspace in the machine.
Throat radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..TR
The radius of the workspace corner.
8.10. Back gauge dimensions
With these finger dimensions the R-axis movement and work/back gauge collision can be
computed.