V1108, 8.10
allowance table’ then an extra function key is available: ‘edit table’. With this function key the
table can be modified to meet user requirements. The table appears in a new window, with its
own set of function keys.
8.g
Each line contains a table entry, with several parameters. In this screen, the following function
keys are available:
Use the arrow keys to scroll to the field you wish to change. Then type the new value and
press ENTER. It is not possible to create a table through this menu. Only when a table has
been loaded into the control is it possible to edit its contents.
For more information about bend-allowance tables, we refer to the Delem manual of the bend-
allowance table.
Bottoming force factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BF
The force needed for an air bend multiplied by this factor in order to obtain the bottoming
force.
Function keys:
new entry Enter a new line in the table.
delete
entry
Delete the current line.
To Next Page
Loading...
