V1108, 1.7
3
Create a new CNC-program by data entry (numerical).
4
To edit an existing CNC-program by data entry
(numerical).
5
To select a program out of the product library.
6
Write programs to or read programs from a back-up
medium.
7
To program the dimensions of the punches.
8
To program the dimensions of the bottom dies.
9
To program the dimensions of the upper side of your
machine.
10
To program the dimensions of your machine table.
11
To program specific programming data.
12
Write or read tooling data and machine shapes to or
from a back-up medium.
To Next Page
Loading...
