V1108, 4.14
When the function key ‘edit’ has been pressed a new, temporary button bar appears with
additional function keys:
When a bend has been marked with the function key 'mark bend' several other function keys
become available:
edit Edit the program with one of the following commands:
- insert bend
- delete bend
- mark bend
copy
column
Copy the value of the currently selected parameter in the
current bend to all other bends.
show
library
Open a window with an overview of the tool library.
alphanum. Enter alphanumeric characters. See also section 1.7.5.
gauge func Program the gauge positions, as already explained
earlier in this chapter.
end Return to the bend parameters.
END Return to the bend parameters.
Function keys:
insert
bend
To insert a new bend between one of the bends.
When pressed, the current bend is copied and added
after the current bend.
delete
bend
To delete the bend that is currently selected.
mark bend Mark the current bend, in order to prepare it for another
action, like move or swap. See description below.
Function keys:
To Next Page
Loading...
