Table 61. Miscellaneous Settings details(continued)
Option Description
System Date Enables you to set the date on the system.
Time Zone Enables you to set the time zone on the system.
Daylight Savings Time Enables you to set whether the Daylight Savings Time is enabled or disabled.
Asset Tag Specifies the asset tag and enables you to modify it for security and tracking
purposes.
Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or
disabled. This option is set to On by default.
NOTE: This option does not apply to 84-key keyboards.
F1/F2 Prompt on Error Enables or disables the F1/F2 prompt on error. This option is set to Enabled by
default. The F1/F2 prompt also includes keyboard errors.
Load Legacy Video Option ROM Enables you to let the system BIOS determine whether it will load legacy video
(INT 10h) option ROM from the video controller, in UEFI Boot Mode. This option
is set to disabled by default
Dell Wyse P25/P45 BIOS Access Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to
Enabled by default.
Power Cycle Request Enables or disables the Power Cycle Request. This option is set to None by
default.
iDRAC Settings
The iDRAC settings is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings.
NOTE: Accessing some of the features on the iDRAC settings needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at iDRAC Manuals.
Device Settings
Device Settings enables you to configure device parameters such as storage controllers or network cards.
54
Pre-operating system management applications
To Next Page
Loading...
