Delta VP3000 Series - Page 661

Chapter 10 Accessories | VP3000
652
Parameter
Description
Set Value (Dec)
Definition
n5-05
EtherNET IP Address 4
5
IP address 192.168.1.5
n5-06
EtherNET Mask Address 1
255
Netmask 255.255.255.0
n5-07
EtherNET Mask Address 2
255
Netmask 255.255.255.0
n5-08
EtherNET Mask Address 3
255
Netmask 255.255.255.0
n5-09
EtherNET Mask Address 4
0
Netmask 255.255.255.0
n5-10
EtherNET Gateway Address 1
192
Default gateway 192.168.1.1
n5-11
EtherNET Gateway Address 2
168
Default gateway 192.168.1.1
n5-12
EtherNET Gateway Address 3
1
Default gateway 192.168.1.1
n5-13
EtherNET Gateway Address 4
1
Default gateway 192.168.1.1
Table 10-28
⚫ LED Indicator & Troubleshooting
There are 2 LED indicators on CMC-EIP01: POWER LED and LINK LED. The POWER LED
displays the status of power supply, and the LINK LED displays the connection status of the
communication.
LED Indicators
LED
Status
Indication
Corrective Action
POWER
Green
ON
Power supply in normal
status
--
OFF
No power supply
Check the power supply
LINK
Green
ON
Network connection is
in normal status
--
Flashes
Network is in operation
--
OFF
Network is not
connected
Check if the network cable is
connected
Table 10-29
Troubleshooting
Abnormality
Cause
Corrective Action
POWER LED OFF
AC motor drive is not powered
Check the power of the AC motor drive,
and see if the power supply is normal
The CMC-EIP01 is not
connected to the AC motor drive
Ensure that CMC-EIP01 is connected to
the AC motor drive
LINK LED OFF
The CMC-EIP01 is not
connected to network
Ensure that the network cable is correctly
connected to network
Poor contact to RJ45 connector
Ensure that RJ45 connector is connected
to Ethernet port
Cannot find
communication card
The CMC-EIP01 is not
connected to network
Ensure that CMC-EIP01 is connected to
network