DGSHAPE DE-3 - Aborting Engraving

Aborting Engraving
Procedure
A
While operation is in progress, press [ENTER/PAUSE].
The tool moves to the upper limit of the Z axis, and then rotation stops.
The following window is displayed.
" P. 22 "When Checking the Status of the Workpiece by Moving the Tool"
XYZ 100%
S 100%
X 15.00mm
Y 23.00mm
Z 0.00mm S 5000rpm
012345678901234567 PAUSE
B
Press [ENTER/PAUSE].
The following window is displayed.
012345678901234567 PAUSE
Resume cutting?
Yes No CancelJob
C
Turn the [Dial] and select [CancelJob].
D
Press [ENTER/PAUSE] to conrm.
The following window is displayed.
Canceling cutting.
Wait a moment please...
34567890123 CANCELING
Pausing and Aborting
23
Chapter 2 Basic Operation