When Moving the Machine
When moving the machine, attach the retainers to protect it from impact during movement.
Avoid touching the rails while performing work
Needlessly touching the rails will remove their grease, leading to the rails rusting.
Rail
Procedure
A
Make sure the machine is not in operation, then turn off the power switch.
The display screen on the handy panel goes dark.
B
Unplug all cables, such as power cord.
C
Remove retainers A, B, and C from the back of this machine.
Retainers B and C
Retainer A
D
Slowly move the spindle head to the back.
78
Chapter 4 Maintenance
To Next Page
Loading...
