DGSHAPE DE-3 - Starting the Engraving Process

D
Select the [Material] and [Tool].
• Material: Wood (Hard)
• Tool: ZEC-A2025
MEMO
The engraving parameters are set automatically according to the selected [Material] and [Tool].
To change the engraving parameters, click [Advanced Settings] and change the settings.
" P. 96 "Detailed Settings on the [Engraving Parameters] Screen"
E
Click [OK].
The [Engraving Parameters] screen closes.
F
Click [OK].
Creating Engraving Data
36
Chapter 3 Basic Engraving Methods