Dieci Pegasus - Limiting Device Exclusion

Getting to know and using the machine
C/38
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
(g.59/C)
A
LIMITING DEVICE EXCLUSION
It is possible to exclude the safety devices by pressing and
holding down button “A” (fig.59/C) while at the same time
moving the joystick. An acoustic alarm in the cab will sound
until the safety devices are restored.
- CAUTION -
When the safety devices are excluded, do not carry out
any pejorative manoeuvres that could compromise the
stability of the machine. Danger of rolling over.
- CAUTION -
DIECI shall not be held liable if the operator knowingly
or unknowingly uses button “A” (g.59/C) incorrectly to
exclude the safety devices.
- CAUTION -
IF BUTTON “A” (g. 59/C) IS PRESSED AND ANY
MANOEUVRES COMPROMISING MACHINE STABILITY
ARE CARRIED OUT, THE MACHINE COULD ROLL-OVER.
- CAUTION
In normal conditions of machine use, the button must
not be used. Its use is only allowed after the locking si-
gnal by the anti roll-over system.
- PROHIBITION -
IT IS FORBIDDEN to use the release button to operate
with loads that exceed the capacities established by the
manufacturer.
The button may only be used in extreme cases,
malfunctions or situations where its use is justied.
It may ONLY be used by authorised personnel who have
been trained to do so.
- PROHIBITION -
IT IS STRICTLY FORBIDDEN TO USE THE ANTI
ROLL-OVER EXCLUSION BUTTON WHEN A HOOK
ATTACHMENT IS ASSEMBLED ON THE MACHINE
(HOOK FOR THE FORK HOLDER PLATE OR THE WINCH).