Dieci Pegasus - Fast;Slow Gear Switch

Getting to know and using the machine
C/26
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
A
B
2
(g.30/C)
(g.31/C)
1
FAST/SLOW GEAR SWITCH
(g.30/C Pos.“A” and “B”)
The machine features a two-speed mechanical gear (fast/
slow gear) for site or road use.
To change gear:
- Slow down and bring the machine to a complete stop.
- Press the “inching” and brake pedals.
- Keep the switch pressed down in position “A” (g.30/C)
for a few seconds to engage slow gear “I”.
The pilot light in the instrument cluster switches off indica-
ting that the gear has been engaged (g.31/C Pos.“2”).
- Hold the switch pressed down in position “B” (g. 30/C)
for a few seconds to engage fast gear “II“.
The pilot light in the instrument cluster will indicate if the
gear has been engaged (g. 31/C Pos.“2”).
- CAUTION:
Pilot light “1” (g.31/C) in the instrument cluster always re-
mains lit when the mechanical gear is engaged.
The change from slow gear “I” to fast gear “II” is signalled by
pilot light “2” switching on (g.31/C).
- CAUTION:
Fast gear “II” is only for road use. It must not be used on
sites or for carrying out work operations.
- CAUTION -
Never attempt to change gear when the
machine is moving.