Getting to know and using tha machine
Integrated devices
C/64
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
Vkmip/h
RPM
AM
1
2
(g.108/C)
SERVICE
When the machine needs to be serviced, the letter “S” is displayed on the LCD (g.108/C Pos.“2”) with the corresponding servi-
ce hours (g.108/C Pos.“1”).
This will only be displayed for 10 seconds when the dashboard is switched on. The letter “S” will ash.
The hour count is managed by the panel.
Every 250 hours, the ashing letter “S” and the service interval reached must be displayed every time the dashboard is switched
on (e.g. 250, 500, 1000 ….) as shown in the table.
The service message is disabled automatically 20 hours after the servicing coupon is displayed
To Next Page
Loading...
