Dieci Pegasus - Pedals

Getting to know and using the machine
C/24
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
3
2
1
(g.27/C)
PEDALS
Accelerator pedal
(g.27/C Pos.“1”)
Press the accelerator pedal to increase the engine revs, relea-
se to reduce. The pedal acts directly on the fuel injection pump.
When the engine is running at minimum speed, the machine is
partially braked.
Service brake pedal
(g.27/C Pos.“2”)
Press the service brake pedal to slow down or stop the ma-
chine. The pedal acts directly on the service brakes inside
the differential axles.
When the brake pedal is pushed, the stoplights in the rear
lights switch on. The lights stay on until the pedal is released.
Check that both lights function on a regular basis.
- CAUTION:
If the pedal is not used very often, check regularly that it fun-
ctions properly. If there are any problems, contact a DIECI
service centre.
“INCHING” pedal
(g.27/C Pos.“3”)
This pedal allows the machine to advance with slow and preci-
se movements even when the engine is running at high speed.
It also acts directly on the hydrostatic pump reducing the ow rate.
When the pedal is completely pressed down, the machine
stops and stays partially braked.
- CAUTION:
Do not press the pedal when travelling at high speed,
the machine will brake abruptly.