CLEANING THE WINDOWS
- The cab windows, headlamps and rear-view mirrors
must be washed frequently with soapy water.
- After you have cleaned these components, dry carefully.
Do not leave any stains or halos that may limit or distort
the operator's view.
CLEANING THE CAB
- Clean the soft upholstery in the cab with a cloth that has
been immerged in a solution of water and detergent and
then tightly squeezed.
- Clean the driver’s seat and the floor with a vacuum
cleaner and/or a stiff brush. If necessary, use a damp
cloth to remove any stubborn stains.
- CAUTION -
DO NOT USE JETS OF WATER INSIDE THE CAB.
- Clean the seat-belts with a sponge dipped in hot soapy
water and simply leave them to dry.
- The fabric seats should be cleaned with a stiff brush or vacu-
um cleaner. Plastic seats should be cleaned with a damp cloth.
SAFETY STICKERS
- Consult the summary table in the chapter “MAINTENAN-
CE” for the inspection schedule.
- Replace any Danger, Caution, Hazard or instruction
stickers that are illegible or missing.
- Read all the safety warnings on the machine and comply
with their contents before starting, running, refuelling or
carrying out maintenance work. Clean said warnings if
covered in mud, cement or other deposits. Do not remove
for any reason. If damaged, lost or illegible, replace im-
mediately. Orders must be placed using the same process
as for spare parts (ensure you include the model and se-
rial number of the machine when you place your order).
- The location and code numbers of the safety stickers are illu-
strated in chapter "B – SAFETY STANDARDS" in this manual.
To Next Page
Loading...
