Getting to know and using tha machine
Integrated devices
C/80
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
Alarm code
20
21
22
23
24
44
45
46
90
91
92
93
94
95
96
97
Description
Pressure transducer reading in the compensator cylinder
(rod side) less than the minimum value.
Pressure transducer reading in the compensator cylinder
(rod side) more than the maximum value.
Watchdog relay rereading error
No can bus ACT 1 reception
No can bus ACT 2 reception
System program CRC check error
System program CRC check error
System program CRC check error
Non-congruent extension transducer reading
Non-congruent angle transducer reading
The two signal readings from the stabilisers on the ground are not congruent
The two signal readings from the stabilisers on the ground are not congruent
The two signal readings from the stabilisers on the ground are not congruent
Out-block rereading error
Boom block rereading error
Minimum angle block rereading error
To Next Page
Loading...
