ANY MODIFICATION TO THE MACHINE REQUIRES A NEW TEST TO CHECK
CONFORMITY WITH THE “
” MACHINE DIRECTIVE 98/37.
THIS ALSO APPLIES IN CASE OF REPAIRS WITH NON-ORIGINAL SPARE PARTS.
ANY PROCEDURES OR MAINTENANCE OPERATIONS NOT DESCRIBED IN THIS
MANUAL ARE STRICTLY FORBIDDEN AND MUST BE CARRIED OUT AT AN AU-
THORISED REPAIR CENTRE AND BY QUALIFIED PERSONNEL.
THE OPERATOR CAN CARRY OUT ONLY THE FOLLOWING CHECKS:
FLUID LEVELS, AIR FILTER CLEANING, AND TYRE PRESSURE.
THESE OPERATIONS MUST BE CARRIED OUT IN COMPLIANCE WITH
THE SAFETY REGULATIONS CONTAINED IN THIS MANUAL.
THE CHEQUERED PLATES AND THE CAB FLOOR ARE THE ONLY PARTS
OF THE MACHINE THAT CAN BE WALKED ON. USE A LADDER
(WITH SUITABLE SPECIFICATIONS) TO CARRY OUT MAINTENANCE
WORK ON PARTS THAT CANNOT BE REACHED FROM THE GROUND.
IT IS COMPULSORY TO READ AND LEARN CHAPTERS “B” AND “C” (SAFETY STAN-
DARDS/GETTING TO KNOW AND USING THE MACHINE) BEFORE READING CHAPTER “D”.
IT IS FORBIDDEN TO CARRY OUT ANY MAINTENANCE ON THE MACHINE UNLESS
THE CONTENTS OF THIS CHAPTER HAVE BEEN CAREFULLY READ AND LEARNT.
To Next Page
Loading...
