ANY MODIFICATION TO THE MACHINE REQUIRES A NEW TEST TO CHECK
CONFORMITY WITH THE “ ” MACHINE DIRECTIVE 98/37. THIS ALSO
APPLIES IN CASE OF REPAIRS WITH NON-ORIGINAL SPARE PARTS.
IT IS FORBIDDEN TO START USING THE MACHINE UNTIL THE CONTENTS OF
THIS MANUAL HAVE BEEN CAREFULLY READ AND LEARNT.
REGARDLESS OF HOW MUCH EXPERIENCE THE OPERATOR MAY HAVE, IN THIS
AREA, IT IS ESSENTIAL THAT HE OR SHE LEARNS THE EXACT LOCATION AND
FUNCTION OF ALL INSTRUMENTS AND CONTROLS BEFORE USING THE MACHINE.
THE IMAGES, DESCRIPTIONS AND MEASUREMENTS IN THIS CHAPTER ALL
REFER TO STANDARD MACHINES.
UPON REQUEST, YOUR MACHINE CAN BE FITTED OUT WITH OPTIONAL
CONTROLS AND ACCESSORIES.
ANY FUNCTION OR PROCEDURE REGARDING THE USE AND FITTING OF MACHINE
ATTACHMENTS NOT DESCRIBED IN THIS MANUAL ARE STRICTLY FORBIDDEN.
IT IS STRICTLY FORBIDDEN TO MAKE ANY USE OF THE MACHINE OTHER
THAN THE USE DESCRIBED IN THIS MANUAL.
IT IS COMPULSORY TO READ AND LEARN CHAPTER “B” (SAFETY STANDARDS)
BEFORE READING CHAPTER “C” AND BEFORE USING THE MACHINE.
To Next Page
Loading...
