Instructions for use Oxylog 3000 plus SW 1.n 141
Technical data
Battery
Temperature –20 to +50 °C
(preferred long-term storage temperature <30 °C)
Ambient pressure 570 to 1200 hPa
Relative humidity 5 to 95 % (no condensation)
Settings
Ventilation modes VC-CMV, VC-AC, VC-SIMV, VC-SIMV/PS, Spn-CPAP,
Spn-CPAP/PS, PC-BIPAP, PC-BIPAP/PS
Optional: AutoFlow for VC-CMV, VC-AC and
VC-SIMV(/PS)
Respiratory rate RR 2 to 60/min (VC-SIMV, PC-BIPAP)
5 to 60/min (VC-CMV, VC-AC)
12 to 60/min with apnea ventilation
Ventilation time ratio I:E 1:100 to 50:1
Inspiratory time Ti 0.2 to 10 s
Tidal volume VT 0.05 to 2.0 L, BTPS
Measured values based on the conditions of the
patient's lungs, 37 °C body temperature, airway pres-
sure, water-vapor-saturated gas.
Accuracy of
setting
±15 % of the set value or ±25 mL, whichever is greater
(adult breathing hose).
±15 % of the set value or ±15 mL, whichever is greater
(pediatric breathing hose).
Inspiratory pressure Pinsp PEEP +3 to +55 mbar
O
2 concentration 40 to 100 Vol%
Accuracy of
setting
±10 Vol%. The actual value depends on the inspiratory
flow
1)
and mean airway pressure.
Positive end-expiratory pressure PEEP 0 to 20 mbar, no negative pressure.
Trigger sensitivity (flow trigger) 1 to 15 L/min
To Next Page
Loading...
Need help?
General
