Assembly
40 Instructions for use Oxylog 3000 plus SW 1.n
External power supply with
AC/DC power pack (mains voltage)
1 Connect the mains plug (A) to the mains
outlet.
2 Connect the DC connector (B) to the DC socket
(C) of Oxylog 3000 plus.
3 When Oxylog 3000 plus is correctly connected
to an external power supply, the indicator
(D) lights up.
To isolate the ventilator system from mains power,
disconnect the power cable from the power
socket.
WARNING
The AC/DC power pack must not be used
outdoors.
Risk of electric shock and risk of damage to
device.
017
To Next Page
Loading...
Need help?
General
