Instructions for use Oxylog 3000 plus SW 1.n 51
Getting started
Getting started
Charging the battery . . . . . . . . . . . . . . . . . . 52
Indication of battery capacity in battery
operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Determining the approximate pneumatic
operating time. . . . . . . . . . . . . . . . . . . . . . . . 53
Checking the operational readiness. . . . . . 54
Performing the device check. . . . . . . . . . . . 54
Performing the device check . . . . . . . . . . . . . 54
Switching the device on . . . . . . . . . . . . . . . . . 55
Checking the connections . . . . . . . . . . . . . . . 56
System check . . . . . . . . . . . . . . . . . . . . . . . . . 56
Checking the high airway pressure and
disconnection alarm . . . . . . . . . . . . . . . . . . . . 57
Checking the power supply failure alarm . . . . 57
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 57
CO
2 zero calibration and filter check
before ventilation (optional) . . . . . . . . . . . . 58
Zero calibration before ventilation . . . . . . . . . 59
CO
2 filter check before ventilation . . . . . . . . . 59
Preparation for use after system check,
CO
2 zero calibration and CO2 filter
check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
To Next Page
Loading...
Need help?
General
