Instructions for use Oxylog 3000 plus SW 1.n 23
System overview
Abbreviations
Abbreviation Explanation
100 % O
2 100 % O2 flow
AF AutoFlow
ATPD Ambient Temperature and Pressure,
Dry (ambient, temperature and pres-
sure, dry)
BF Body Floating
bpm Breaths per minute
BTPS Body Temperature and Pressure,
Saturated. Measured values based
on the conditions of the patient's
lungs, 37 °C body temperature,
airway pressure,
water-vapor-saturated gas
C Compliance
CO
2 Carbon dioxide
CSM Customer Service Mode
ΔPsupp Positive pressure above PEEP
EMC Electromagnetic compatibility
ESD Electrostatic Discharge
etCO
2 Endtidal CO2 concentration
FiO
2 Inspiratory oxygen
fraction
FRC Functional Residual Capacity
HME Heat and Moisture Exchanger
(heat and moisture exchanger)
I:E Ratio of inspiratory time to
Expiratory time
IP34 Level 3 protection against foreign
bodies and contact,
Level 4 protection against ingress of
liquids
IPX2 Level 2 protection against the
ingress of liquids
IPX4 Level 4 protection against the
ingress of liquids
MEDIBUS.X Dräger communication protocol for
medical devices with uniform data
definition for all devices
MVe Total expiratory minute volume
MVespon Spontaneous breathing portion of
the expiratory minute volume
MVi Total inspiratory minute volume
NIV Non-invasive ventilation –
mask ventilation
O
2 Oxygen
O
2 inhalat. O2 inhalation
Paw Airway pressure
PC-BIPAP Pressure Controlled – Biphasic
Positive Airway Pressure
(spontaneous breathing under
continuous positive airway pressure
with 2 different pressure levels)
PEEP Positive End Expiratory Pressure
PIF Peak Inspiratory Flow
Pinsp Inspiratory pressure
PIP Peak Inspiratory Pressure
Pmax Maximum allowed
airway pressure
Pmean Mean airway pressure
Pplat Plateau pressure
PS Pressure Support pressure-
supported spontaneous breathing
R Resistance
RF Radio Frequency
RR breathing frequency
RRapn Respiratory Rate during apnea
ventilation
RRsp Spontaneous breathing rate
Abbreviation Explanation
To Next Page
Loading...
Need help?
General
