5-32 DynaVox Technologies
Chapter 5: System Setup Protecting System Settings
Change Your Password You can change your MightyMo/MiniMo password at any time.
To replace your old password, follow these steps.
1. Select the blue Setup button in the title bar. The system keyboard
will open.
2. Enter the current password and then select the OK button to close
the system keyboard. The Mo Setup menu will open.
3. Select the Interface Features button in the Mo Setup menu. The
Interface Features menu will open.
4. Select the Advanced Settings tab.
5. Select the Change Password button. A system keyboard will
open.
6. Use the system keyboard to enter the password that you are
currently using.
7. Select the OK button. The system keyboard will request that you
enter a new password.
8. Use the system keyboard to enter a new password.
9. Select the OK button. The system keyboard will request that you
verify the new password.
10. Use the system keyboard to enter the new password exactly as
you did in step 7.
11. Select the OK button to close the system keyboard.
12. Select the OK button when the password is successfully verified.
If the password verification fails, return to step 4 and try again.
13. Select the OK button to close the Interface Features menu.
14. Select the OK button to close the Mo Setup menu.
2 Note: The password is not case-sensitive. You may use upper- and/or
lower-case letters as well as numbers. Your password should
contain between 4-32 characters.
To Next Page
Loading...