5-42 DynaVox Technologies
Chapter 5: System Setup Customizing System Settings
6. Select the OK button to close the Mo Setup menu.
Adjusting the Screen
Brightness
You may wish to make the screen brighter, so it is easier to see in
bright lighting conditions, or dimmer, so it is easier on the eyes under
dark lighting conditions. Also, reducing the screen brightness can
extend the battery charge by lessening the power drain on the
battery.
To make the screen brighter or dimmer, follow these steps:
1. Select the blue Setup button in the title bar. The Mo Setup menu
will open.
2. Select the System Settings button. The System Settings menu
open.
3. Select the Brightness slider. Move the slider thumb to the left to
darken the screen or to the right to lighten the screen.
4. To test the brightness setting, select the Demo Screen Settings
button.
5. Select the OK button to accept the new setting and close the
System Settings menu.
6. Select the OK button to close the Mo Setup menu.
Sending Screen Output to
a Monitor or Projector
2 Note: When the backlight is dimmed, selecting any part of the screen will
immediately turn on the backlight.
2 Note: This option is not available on MightyMo/MiniMo devices with
newer processors.
To Next Page