2-26 DynaVox Technologies
Chapter 2: Hardware Resetting the Device
The rest of the reset will take a few minutes. A splash screen will
be presented as the device restarts automatically (you will not
need to select the power button). When the reset is complete, the
device will start at the introductory page that was presented the
first time the device was turned on.
System Maintenance Performing system maintenance on your MightyMo/MiniMo device
optimizes the efficiency of the page sets by removing any
unnecessary links or information. You can also choose to remove
symbols or sounds that are not currently assigned to any buttons. It is
recommended that you perform system maintenance after deleting or
renaming numerous pages.
Set System Maintenance Options
Before you perform system maintenance on your MightyMo/MiniMo
device, you have the option to generate lists of symbols or sounds
that are not currently assigned to any buttons. When these lists are
displayed, you can choose to delete any unused symbols or sounds
to regain the disk space on your data storage card.
In order to view either of these lists, you must first set the system
maintenance options in the Advanced Settings tab of the Interface
Features menu. To do so, follow these steps:
1. Select the blue Setup button in the title bar. The Mo Setup menu
will open.
2. Select the Interface Features button. The Interface Features
menu will open.
To Next Page
Loading...