DynaVox MightyMo - Set up the Play a Recording Behavior; Set up the Go to

6-12 DynaVox Technologies
Chapter 6: Working with Buttons Modifying Buttons
8. To remove a behavior from the Steps list, select the behavior and
then select the Delete button.
9. Select the OK button to accept the new Steps list for the button and
to close the Behavior Editor menu. The new behaviors will now be
shown on the Modify Button menu.
10. Select the OK button to accept the new behaviors and close the
Modify Button menu.
Set Up the Play a
Recording Behavior
When a button containing the Play a Recording behavior is selected,
the MightyMo/MiniMo will play the recording that was specified when
the behavior was set up. See Create a Recording with the Modify
Button on page 8-11 or Create a Recording with the Record
Button on page 8-15 for more information on creating or changing
the recordings.
To add the Play a Recording behavior to a button, follow these steps:
1. Open the page with the button that will contain the Play a
Recording behavior.
2. Select the green Modify button in the title bar. The button will turn
red when it is selected.
3. Select the button that will contain the behavior. The Modify Button
menu will open.
4. Select the Behaviors button. The Behavior Editor menu will open.
5. Select the Play a Recording behavior in the Behaviors list.