MightyMo/MiniMo User’s Guide 8-27
Part # 400030-C
Sharing Sounds Chapter 8: Sound Management
6. Select the OK button.
7. You may be asked if you want to overwrite existing sounds with
conflicting names. If you select Yes, the existing sound will be
automatically deleted and replaced with an imported sound that
has the same name. If you select No, the existing sound will
remain intact, and the new sound will not be imported. If you select
Rename, the system keyboard will open, enabling you to rename
the sound that is being imported.
8. Select the OK button after the sound(s) are successfully imported.
9. Select the OK button to close the Import Items menu.
10. Select the OK button to close the Mo Setup menu.
You may now remove the secondary storage card from your
MightyMo/MiniMo device if you wish.
The sound that you imported is now stored in the User Files/Sounds
folder on your primary data storage card. It will be shown in the
viewport of the Play Sound... menu when you are browsing through
your custom sounds (the pull-down menu is set to Mine).
To assign this sound to a button, refer to Select a New Recording
with the Modify Button on page 8-13 or Select an Audio Cue
(Using an Existing Recording) on page 8-19.
Export Sounds to a USB
Storage Device
You can export sounds from your MightyMo/MiniMo device to a
removable USB storage device, enabling you to save a backup copy
2 Note: If there is not enough free space on your data storage card to
import the new file(s), an alert window will appear to inform you.
Select the OK button to close the window. In this case, you must
free space on your data storage card before importing the file(s).
To Next Page
Loading...