MightyMo/MiniMo User’s Guide 5-33
Part # 400030-C
Protecting System Settings Chapter 5: System Setup
Deactivate Password
Protection
You can turn password protection off by following these steps.
1. Select the blue Setup button in the title bar. The system keyboard
will open.
2. Enter the current password and then select the OK button to close
the system keyboard. The Mo Setup menu will open.
3. Select the Interface Features button in the Mo Setup menu. The
Interface Features menu will open.
4. Select the Advanced Settings tab.
5. Select the Enable Password check box to remove the checkmark.
6. Select the OK button to close the Interface Features menu.
7. Select the OK button to close the Mo Setup menu.
Password protection has been removed from your device and your
password has been deleted. If you decide to reactivate password
protection, you will have to enter a new password.
To Next Page