12-4 DynaVox Technologies
Chapter 12: Backing Up, Restoring & Upgrading Backing Up and Restoring User Data
7. Select the Name text box. A system keyboard will open.
8. Use the system keyboard to enter a name for the new backup file.
9. Select the OK button to close the system keyboard. A window will
open to note that the backup is in progress. Please be patient - the
backup process may take a few minutes.
10. When the backup is complete, select the OK button.
11. Select the OK button to close the Backup Upgrade menu.
12. Select the OK button to close the Mo Setup menu.
You may now disconnect the USB storage device from the
MightyMo/MiniMo device, if you wish. Be sure to keep the USB
storage device in a safe place.
Backing Up to a Secondary Storage Card
You may back up data to a secondary data storage card installed in
your MightyMo/MiniMo device. This creates a backup file (.bck) on
the storage card.
To back up user data to a secondary storage card, follow these steps:
1. Insert the secondary storage card into your device (refer to the
instructions in Install a Secondary Storage Card on page 2-18).
2. Select the blue Setup button in the title bar. The Mo Setup menu
will open.
3. Select the Backup/Upgrade button. The Backup Upgrade menu
will open.
4. Select the Mo Backup button.
2 Note: It is a good idea to incorporate the date of the backup into the
name of the backup file - for example, “backup032107.”
2 Note: If there is not enough free space on your USB storage device to
create the backup file, an alert window will appear to inform you.
Select the OK button to close the window. In this case, you must
free space on your USB storage device before you can use it to
store your backup file.
To Next Page