5-50 DynaVox Technologies
Chapter 5: System Setup Customizing System Settings
b. Use the system keyboard to enter the new key.
c. Select the OK button. The Key text box will show the new key.
8. The Start Logging or Stop Logging button toggles between these
two settings. Select the Start Logging button to begin logging.
(Or, select the Stop Logging button to end logging.)
9. Select the OK button to accept the new settings and close the Data
Logging menu.
10. Select the OK button to close the System Settings menu.
11. Select the OK button to close the Mo Setup menu.
Viewing System Memory
Usage
The MightyMo/MiniMo program memory is used to run the software,
including opening pages and performing button behaviors, logging
activities and animations. When program memory nears capacity, the
system may respond slowly.
The MightyMo/MiniMo storage memory is used to store page and
button information and logging file data. When storage memory nears
capacity, no new pages may be created unless files are deleted to
create additional memory capacity.
To view system memory usage, follow these steps:
1. Select the blue Setup button in the title bar. The Mo Setup menu
will open.
2. Select the System Settings button. The System Settings menu
will open.
2 Note: The key may be any string of up to 256 alphanumeric characters. A
string of five to eight characters is sufficient to maintain privacy. (If
no characters are entered, the encryption will be performed using
the null character, which will limit the privacy provided by
encryption.)
To Next Page