MightyMo/MiniMo User’s Guide 5-35
Part # 400030-C
Creating and Using Customized Colors Chapter 5: System Setup
The Color Selector menu offers the following tools:
Swatches The contents of the Swatches tab pane are
automatically presented whenever the Color
Selector menu is opened. This tab pane
offers a palette of color buttons. When a
color button is selected, the color will fill the
display square on the right side of the menu.
The three buttons at the bottom of the tab
pane can also be selected as color
swatches. Select the Primary Color button to
make the selected item the same color as the
system menu backgrounds. Use the
Secondary Color button to make the selected
item the same color as the system menu
buttons and outlines. Use the Transparent
button to remove all solid color from the
selected item.
RGB Select this tab to display a tab pane with
three sliders that can be used to create a
customized color. Use the Red slider to
specify the amount of red in the new color.
The Green slider affects the amount of green
in the new color. The Blue slider controls the
amount of blue in the color. These sliders
can be used alone or in combination with the
sliders on the HSV tab pane.
HSV Select this tab to display a tab pane with
three sliders that can be used to create a
customized color. Use the Hue slider to
specify the color family for the new color. The
Saturation slider affects the purity of a color.
The Brightness slider controls the intensity of
the color. These sliders can be used alone or
in combination with the sliders on the RGB
tab pane.
My Swatches Select this tab to display a tab pane with an
empty palette of buttons. You can fill this
palette with custom colors.
Unlabeled
Display Square
When you use the sliders to create a new
color, the color will be displayed in this
square.
Add to My
Swatches
Select this button if you want to save the
color you have created in the display square
above this button. The color will be saved to
the palette of buttons on the My Swatches
tab pane.
To Next Page