1-18 DynaVox Technologies
Chapter 1: Introduction Terms You Should Know
It contains the standard alphanumeric keys as well as keys for
commands that are specific to using the scanning selection method in
the MightyMo/MiniMo software.
Text Window The text window appears at the top of the
popup and displays the text you are
entering. Unlike the Message Window,
selecting the text window directly will not
speak its contents; rather, it will move the
cursor to the location of the selection.
Space Select the Space button to insert a blank
space in between characters in the text
window.
Return Select the Return button to move the cursor
to the beginning of the next line.
OK Select the OK button to accept the content
that you have entered into the text window
and close the system keyboard.
Cancel Select the Cancel button to close the
system keyboard without accepting the
content that you have entered into the text
window.
Clear Select the Clear button to clear the content
from the text window.
Del Word Select the Del Word button to delete the last
word from the text window.
Cursor Arrows Use the cursor arrows in the bottom right
corner to move the placement of the cursor
in the text window.
Start Selec If you are using the arrow buttons to move
the cursor in the text window, select the
Start Selec button to create the beginning of
a highlight at the position of the cursor. Use
the arrow buttons to move across or up and
down the text window. An ending point for
the highlight will be added when you select
the Stop Selec button.
Stop Selec If you are using arrow buttons to highlight
text after selecting the Start Selec button,
select the Stop Selec button to create an
end to the highlight.
Line Begin Select the Line Begin button to move the
cursor in the text window to the beginning of
the line it is on.
To Next Page