2-16 DynaVox Technologies
Chapter 2: Hardware Battery Information and Care
4. Remove the battery door.
5. Four colored wires from the battery pack are attached to one white
plastic connector that is plugged into the device. Carefully unplug
this connector.
6. Pull the battery pack free of the device case.
7. Slide the new battery pack into place.
8. Plug the white plastic connector from the new battery into the
device.
9. Tuck the colored wires inside the device, keeping them clear of the
screw insert.
10. Replace the battery door and the screw holding it in place.
11. Charge the battery overnight (see Charge the Battery on
page 2-10).
12. Dispose of the old battery in accordance to your local
environmental laws.
To Next Page
Loading...