Endress+Hauser Proline Promass E 500

To Next Page

To Previous Page

Diagnostics and troubleshooting Proline Promass E 500 PROFIBUS PA

246 Endress+Hauser

Diagnostic information Remedy instructions

No. Short text

913 Medium unsuitable 1. Check process conditions

2. Check electronic modules or sensor

Measured variable status [from the factory]

Quality Uncertain

Quality substatus Process related

Coding (hex) 0x78 to 0x7B

Status signal S

Diagnostic behavior Warning

Influenced measured variables

• Oscillation amplitude 1

• Oscillation amplitude 2

• Signal asymmetry

• Carrier mass flow

• Carrier pipe temperature

• Target corrected volume flow

• Carrier corrected volume flow

• Concentration

• Oscillation damping 1

• Oscillation damping 2

• Density

• Oil density

• Water density

• Dynamic viscosity

• Sensor electronic temperature (ISEM)

• Empty pipe detection option

• GSV flow

• GSV flow alternative

• Kinematic viscosity

• Low flow cut off option

• Mass flow

• Oil mass flow

• Water mass flow

• HBSI

• NSV flow

• NSV flow alternative

• External pressure

• Exciter current 1

• Exciter current 2

• Oscillation frequency 1

• Oscillation frequency 2

• S&W volume flow

• Reference density

• Reference density alternative

• Corrected volume flow

• Oil corrected volume flow

• Water corrected volume flow

• Oscillation damping fluctuation 1

• Oscillation damping fluctuation 2

• Frequency fluctuation 1

• Frequency fluctuation 2

• Target mass flow

• Carrier volume flow

• Target volume flow

• Temp. compensated dynamic viscosity

• Temp. compensated kinematic viscosity

• Temperature

• Status

• Volume flow

• Oil volume flow

• Water volume flow

• Water cut

1) Diagnostic behavior can be changed. This causes the overall status of the measured variable to change.

Diagnostic information Remedy instructions

No. Short text

941 API temperature out of specification 1. Check process temperature with selected API commodity group

2. Check API related parameters

Measured variable status

Quality Bad

Quality substatus Maintenance alarm

Coding (hex) 0x24 to 0x27