Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 129
Confidential
A D J U S T M E N T
R E Q U I R E D
When replacing the Main Board, the MAC address need to be
set if the EEPROM data could not be read from the old Main
Board. (See
"5.2.6 MAC Address Setting" (p.217).)
Figure 4-45. Position for the MAC Address Label
After removing/replacing the Main Board, make the specified
adjustments. (See
Chapter 5 "ADJUSTMENT".)
To Next Page
Loading...
