Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 152
Confidential
Make sure to install the Lower ASF Paper Guide Assy while
pressing the Spur Gear B in the direction of the arrow so as to
engage it with the Spur Gear C. (See
Fig. 4-92.)
When installing the Lower ASF Paper Guide Assy, the tip of
the flap is inserted between the CDR Tray Assy and the Upper
Paper Guide. Take care not to damage the flap by getting
contact with such parts then. (See
Fig. 4-96.)
Make sure to attach the Intermediate Roller A into the bearing
on the Base Frame. (See
Fig. 4-92.)
Attach the rear side of the Lower ASF Paper Guide Assy so as
to let its roller and the Intermediate Roller B touch. (See
Fig.
4-92, Fig. 4-96.)
Figure 4-96. Installing the Lower ASF Paper Guide Assy
Insert the dowel of the left arm of the CDR Tray Assy into the
groove B on the Lower ASF Paper Guide Assy. (See
Fig. 4-92.)
Make sure to align the dowels (x2) of the Base Frame with the
positioning holes (x2) of the Lower when reassembling them.
(See
Fig. 4-92.)
Lower ASF Paper Guide Assy
Flap
Rear side
Tighten a screw while pulling Lower ASF Paper Guide Assy
toward rear side of the printer when securing for Lower ASF
Paper Guide Assy. On this occasion, make sure the dowels
touche foreside of positioning holes in 80 column side. (See
Fig.
4-97.)
Figure 4-97. Tighten screw for Lower ASF Paper Guide Assy
Make sure the dowels touche with
foresideof positioning holes.
To Next Page
Loading...
